primopattern is an advanced, ready to use one-component-material that burns out cleanly and completely. primopattern is available as modeling gel and modeling paste
indispensable light cured material
for all cases – for every lab
-
primopattern LC Gel & Pasteperfectly aligned viscosity of Gel and Paste for quick and precise application -
primopattern LC Gelready to use one-component-material, light cured and thixotrop -
primopattern LC Gelstays where placed – does not run – therefore very economical -
combined restorationseasy control of the applied thickness -
combined restorationspolymerisation neutral and absolutely dimensionally stable with great fitting properties -
primopattern LC Pasteburns out cleanly and completely -
Implantologyno distortion, high surface hardness and great strength -
crowns and bridgeseasy to grind with carbide burs or rubber polishers -
transfer jiglight cured cases can be lifted off easily and stress free -
transfer jig with bite control splintdoes not contain MMA and peroxide and has no taste or smell
-
primopattern LC Gel & Pasteperfectly aligned viscosity of Gel and Paste for quick and precise application
-
primopattern LC Gelready to use one-component-material, light cured and thixotrop
-
primopattern LC Gelstays where placed – does not run – therefore very economical
-
combined restorationseasy control of the applied thickness
-
combined restorationspolymerisation neutral and absolutely dimensionally stable with great fitting properties
-
primopattern LC Pasteburns out cleanly and completely
-
Implantologyno distortion, high surface hardness and great strength
-
crowns and bridgeseasy to grind with carbide burs or rubber polishers
-
transfer jiglight cured cases can be lifted off easily and stress free
-
transfer jig with bite control splint
does not contain MMA and peroxide and has no taste or smell
uses
Implantology:
modellations for casting or scanning of
- implant abutments
- implant bars
- implant superstructures
- tertiary frameworks over galvano mesiostructures
production of
- transfer jigs
- individual abutments, etc.
as well as connecting or fixing of single implant parts or segments
fixed dentures:
modellations for casting, scanning or pressing of
- crowns and bridges
- understructures for zircon copy milling machines
- inlays and onlays
- understructures for galvano or captek bridges
combined restorations:
- primary and secondary telescopic or conus crowns
- individual attachments
- RSS secondary attachments, etc.
further uses:
- retaining single parts or parts that needed to be separated for welding or soldering
- fixing of attachments
- general retaining or fixing of single parts or segments
advantages
primopattern Gel and Paste stand out due to the following product characteristics:
- ready to use one-component-material, light cured and thixotrop
- perfectly aligned viscosity of Gel and Paste for quick and precise application
- stays where placed – does not run – therefore very economical
- easy control of the applied thickness
- long working time (> 20 min.) – short curing time (< 5 min.)
- cures in most conventional light curing units (320nm-500nm)
- polymerisation neutral and absolutely dimensionally stable with great fitting properties
- no distortion, high surface hardness and great strength
- light cured cases can be lifted off easily and stress free
- easy to grind with carbide burs or rubber polishers
- burns out cleanly and completely
- can be used in conjunction with conventional waxes or light cured wax (metacon)
- does not contain MMA and peroxide and has no taste or smell
case pictures
instruction video
video animation
Implantology:
modellations for casting or scanning of
- implant abutments
- implant bars
- implant superstructures
- tertiary frameworks over galvano mesiostructures
production of
- transfer jigs
- individual abutments, etc.
as well as connecting or fixing of single implant parts or segments
fixed dentures:
modellations for casting, scanning or pressing of
- crowns and bridges
- understructures for zircon copy milling machines
- inlays and onlays
- understructures for galvano or captek bridges
combined restorations:
- primary and secondary telescopic or conus crowns
- individual attachments
- RSS secondary attachments, etc.
further uses:
- retaining single parts or parts that needed to be separated for welding or soldering
- fixing of attachments
- general retaining or fixing of single parts or segments
primopattern Gel and Paste stand out due to the following product characteristics:
- ready to use one-component-material, light cured and thixotrop
- perfectly aligned viscosity of Gel and Paste for quick and precise application
- stays where placed – does not run – therefore very economical
- easy control of the applied thickness
- long working time (> 20 min.) – short curing time (< 5 min.)
- cures in most conventional light curing units (320nm-500nm)
- polymerisation neutral and absolutely dimensionally stable with great fitting properties
- no distortion, high surface hardness and great strength
- light cured cases can be lifted off easily and stress free
- easy to grind with carbide burs or rubber polishers
- burns out cleanly and completely
- can be used in conjunction with conventional waxes or light cured wax (metacon)
- does not contain MMA and peroxide and has no taste or smell
technical tipsuseful tips for your workflow
Technique Tips:
- For applying larger amounts of material at a time efficiently (i.e. for bars, pontics, etc.) use primopattern LC Paste.
- Use primopattern LC Gel for the more delicate works that require less layer thickness.
- In cases with larger volumes of primopattern material, cover the outer surfaces with a thin layer of conventional modelling wax before investing.
- When the syringe is used with a lightly vibrating motion, the material becomes more flowable, when the vibrating motion is stopped, the Gel will stay as placed (thixotropic behaviour).
- Slightly moisten your fingers and instruments with metatouch (IM200) before kneading the paste.
light curing:
primopattern cures in most conventional light curing units that supply a wavelength spectrum of 320nm-500nm. Most suitable are the Metalight light curing units (primotec), as they are equipped with a special cooling system for most gentle polymerisation.
Average polymerisation times in light curing units equipped with:
- UV/UV-A lamps (e.g. Metalight): 3.5 - 5 minutes
- halogen lamps: 2 minutes
- strobo lights (i.e. UniXS): 90 seconds
working procedurethe workflows for standard applications
Technique Tips:
- For applying larger amounts of material at a time efficiently (i.e. for bars, pontics, etc.) use primopattern LC Paste.
- Use primopattern LC Gel for the more delicate works that require less layer thickness.
- In cases with larger volumes of primopattern material, cover the outer surfaces with a thin layer of conventional modelling wax before investing.
- When the syringe is used with a lightly vibrating motion, the material becomes more flowable, when the vibrating motion is stopped, the Gel will stay as placed (thixotropic behaviour).
- Slightly moisten your fingers and instruments with metatouch (IM200) before kneading the paste.
light curing:
primopattern cures in most conventional light curing units that supply a wavelength spectrum of 320nm-500nm. Most suitable are the Metalight light curing units (primotec), as they are equipped with a special cooling system for most gentle polymerisation.
Average polymerisation times in light curing units equipped with:
- UV/UV-A lamps (e.g. Metalight): 3.5 - 5 minutes
- halogen lamps: 2 minutes
- strobo lights (i.e. UniXS): 90 seconds
All primopattern products
primopattern LC Gel
light-curing universal composite as a gel
(5 syringes of 3g each)
primopattern LC Paste
light-curing universal composite as a paste (30 g)
primopattern LC Gel clear
light-curing universal composite as a gel (5x3g).
Like PA100 but in transparent.
PE-Insert for case
for 2 models (without case and models)
made easy