Skip to main content

metalight

broadband dental lab light curing units

gentle and distortion free polymerisation of all light cured dental materials was the defined goal for developing the metalight dental lab light curing units. More info...

 

Metalight Mini
plus statutory VAT and shipping costs
399,00 €

Broadband light curing device with cooling system

  • two UV special lamps
  • UV spectrum: 320nm - 500nm
  • 230V / 50Hz
  • Dimensions: L=310mm, Ø=120mm, H=162mm
  • Internal dimensions: L=150mm, W=90mm, H=60mm to 35mm
  • Weight: 2.7kg

uses

The Metalight units cure all primotec light cured materials, including:

  • Metacon light cured wax
  • primopattern light cured universal modeling resin
  • primosplint composite material for night guards and more
  • primobase light cured base plate material
  • primotray custom impression tray material

and most other light cured dental materials

advantages

  • gentle light curing due to constantly low polymerization temperature
  • innovative cooling system with fine dust filter
  • comfortable and easy to use
  • UV filters allow direct observation of the light curing process
  • advanced Alutec Design with highest quality materials and components
  • stainless steel inside, multi color coated V2A steel housing, laser cut and CAD/CAM milled aluminium parts for long lasting durability
  • Made in Germany with two years warranty (excluding bulbs)

details

Inside dimensions metalight Mini:

     Width 9.0cm
     Height at the front 6.0 cm - at the back 3.5 cm
     Length 15.0 cm

Inner dimensions metalight Trend:

     Width 12.4cm
     Height at the front 12.0 cm - at the back 8.0 cm
     Length 16.0cm

models

Metalight trend – more spacious than the Metalight mini, yet still perfect to use right at the work bench, the metalight trend is equipped with an "easy-touch" operating panel. On this panel three easy touch buttons for 5, 10 and 15 minutes polymerization cycles allow quick selection of the desired program.

Lighting and cooling system are microprocessor controlled and switch on and off automatically. An acoustic signal indicates the end of light curing cycle.

The chamber provides sufficient space for the metavac suction device, up to 4 models and taller models with plaster bases. Consequently the metalight trend is the perfect light curing unit for making all possible cases with the metacon light cured wax system or primobase base plates. The polymerisation spectrum covers the complete range from 320 to 500nm.

The fully removeable front lid with UV filter and magnet switch allows easy access to the light curing chamber and direct observation of the light curing process from outside.

Metalight mini – is the smallest and most cost effective Metalight model. It is perfect for use directly at the work bench, which increases efficiency and avoids waiting times at the central laboratory light curing unit.

Due to its two special lamps, the metalight mini is applicable for the light curing of most dental materials with a polymerisation spectrum between 320 and 500 nm.

The polymerisation chamber of the metalight mini accomodates up to two stone models. Its stainless steel drawer makes it easy to place the stone models in the unit while the combined UV filter allows direct observation of the light curing process.

product pictures

The Metalight units cure all primotec light cured materials, including:

  • Metacon light cured wax
  • primopattern light cured universal modeling resin
  • primosplint composite material for night guards and more
  • primobase light cured base plate material
  • primotray custom impression tray material

and most other light cured dental materials

  • gentle light curing due to constantly low polymerization temperature
  • innovative cooling system with fine dust filter
  • comfortable and easy to use
  • UV filters allow direct observation of the light curing process
  • advanced Alutec Design with highest quality materials and components
  • stainless steel inside, multi color coated V2A steel housing, laser cut and CAD/CAM milled aluminium parts for long lasting durability
  • Made in Germany with two years warranty (excluding bulbs)

Inside dimensions metalight Mini:

     Width 9.0cm
     Height at the front 6.0 cm - at the back 3.5 cm
     Length 15.0 cm

Inner dimensions metalight Trend:

     Width 12.4cm
     Height at the front 12.0 cm - at the back 8.0 cm
     Length 16.0cm

Metalight trend – more spacious than the Metalight mini, yet still perfect to use right at the work bench, the metalight trend is equipped with an "easy-touch" operating panel. On this panel three easy touch buttons for 5, 10 and 15 minutes polymerization cycles allow quick selection of the desired program.

Lighting and cooling system are microprocessor controlled and switch on and off automatically. An acoustic signal indicates the end of light curing cycle.

The chamber provides sufficient space for the metavac suction device, up to 4 models and taller models with plaster bases. Consequently the metalight trend is the perfect light curing unit for making all possible cases with the metacon light cured wax system or primobase base plates. The polymerisation spectrum covers the complete range from 320 to 500nm.

The fully removeable front lid with UV filter and magnet switch allows easy access to the light curing chamber and direct observation of the light curing process from outside.

Metalight mini – is the smallest and most cost effective Metalight model. It is perfect for use directly at the work bench, which increases efficiency and avoids waiting times at the central laboratory light curing unit.

Due to its two special lamps, the metalight mini is applicable for the light curing of most dental materials with a polymerisation spectrum between 320 and 500 nm.

The polymerisation chamber of the metalight mini accomodates up to two stone models. Its stainless steel drawer makes it easy to place the stone models in the unit while the combined UV filter allows direct observation of the light curing process.

technical tipsuseful tips for your workflow

Since light curing in the Metalight units takes place gently and without heat generation, an extended light curing time has no negative influence on the material quality of the polymerized cases.

To achieve optimally reproducible light curing times and results, the Metalight bulbs should be replaced after approx. 1,000 hours of operation.

 

backgrounduseful background information

All Metalight units use an innovative, technically advanced cooling system that provides a low and stable polymerization temperature (only slightly above room temperature). This ensures a uniform, gentle and tension-free curing of most light-curing dental materials.

The Metalight bulbs cover the entire polymerization spectrum from 320 – 500 nm.

​​

Since light curing in the Metalight units takes place gently and without heat generation, an extended light curing time has no negative influence on the material quality of the polymerized cases.

To achieve optimally reproducible light curing times and results, the Metalight bulbs should be replaced after approx. 1,000 hours of operation.

 

All Metalight units use an innovative, technically advanced cooling system that provides a low and stable polymerization temperature (only slightly above room temperature). This ensures a uniform, gentle and tension-free curing of most light-curing dental materials.

The Metalight bulbs cover the entire polymerization spectrum from 320 – 500 nm.

​​

All metalight products

Metalight trend light-curing unit

Bild
Metalight Trend Lichthärtegerät
x

Broadband light curing device with cooling system

  • three adjustable polymerization times
  • four UV special lamps
  • UV spectrum: 320nm - 500nm
  • 230V / 50Hz
  • Dimensions: L=330mm, Ø=180mm, H=230mm
  • Internal dimensions: L=160mm, W=124mm, H=120mm to 80mm
  • Weight: 4.3kg
item no.:
ML110
Price
849,00 €

Metalight Mini light-curing unit

Bild
Metalight Mini Lichthärtegerät
x

Broadband light curing device with cooling system

  • two UV special lamps
  • UV spectrum: 320nm - 500nm
  • 230V / 50Hz
  • Dimensions: L=310mm, Ø=120mm, H=162mm
  • Internal dimensions: L=150mm, W=90mm, H=60mm to 35mm
  • Weight: 2.7kg
item no.:
ML120
Price
399,00 €

Metalight UV-lamp 9W/78/G23

Bild
Metalight UV-Lampe 9W/78/G23
x

Spectral range 320 to 400nm
9W/79/G23

item no.:
ML800
Price
25,50 €

Metalight UV-lamp 9W/71/G23

Bild
Metalight UV-Lampe 9W/71/G23
x

Spectral range 400 to 500nm
9W/71/G23

item no.:
ML801
Price
25,50 €
distortion free light curing
Metalight Mini
plus statutory VAT and shipping costs
399,00 €

Broadband light curing device with cooling system

  • two UV special lamps
  • UV spectrum: 320nm - 500nm
  • 230V / 50Hz
  • Dimensions: L=310mm, Ø=120mm, H=162mm
  • Internal dimensions: L=150mm, W=90mm, H=60mm to 35mm
  • Weight: 2.7kg