![](/sites/default/files/phaser_innovation_Logo.png)
the primotec dental phaser welders based on pulsed micro arc technology are optimized for easy, fast and reliable welding of all types of dental welding jobs. More info...
![](/sites/default/files/styles/6zu4_500x333/public/primotec_phaser_mx3-042_1.jpg?itok=tvHlIgSJ)
welding ALL dental alloys, including Palladium-Silver, even
easier, even more gentle and even more versatile.
uses
Wide range of applications:
With the primotec phaser micro impulse welding device you can weld:
- all new dental products or repairs
- all dental alloys and monometals (titanium)
- also different alloys (hybrid, e.g. "gold on steel")
- many welding tasks on orthodontic appliances
easily, safely and reliably.
The 10 preset programs of the phaser devices cover all common alloy types and welding situations in the dental field. Alloys that were previously considered "difficult to weld", such as palladium-silver, are optimally pre-programmed and no longer pose a problem.
Welding in orthodontics is also possible without any problems using the phaser. And if the situation to be welded requires even lower amounts of energy, the new micro mode also offers a solution for this.
advantages
case pictures
innovations
product pictures
Wide range of applications:
With the primotec phaser micro impulse welding device you can weld:
- all new dental products or repairs
- all dental alloys and monometals (titanium)
- also different alloys (hybrid, e.g. "gold on steel")
- many welding tasks on orthodontic appliances
easily, safely and reliably.
The 10 preset programs of the phaser devices cover all common alloy types and welding situations in the dental field. Alloys that were previously considered "difficult to weld", such as palladium-silver, are optimally pre-programmed and no longer pose a problem.
Welding in orthodontics is also possible without any problems using the phaser. And if the situation to be welded requires even lower amounts of energy, the new micro mode also offers a solution for this.
technical tipsuseful tips for your workflow
Especially Palladium-Silver alloys and Cobalt-Chrome alloys with relatively high carbon content are said to be difficult to weld. Because of the almost eutectic behavior of these alloy types, micro cracks in the welding spot tend to appear easily.
The angle at which the tungsten electrode touches the weld has a significant influence on the penentration depth. Maximum penetration is achieved when the electrode is placed at a 90° angle to the workpiece.
working procedurethe workflows for standard applications
backgrounduseful background information
Only the latest high-performance electronics are used in the manufacture of primotec phaser micro-pulse welders. Combined with precise and reliable precision mechanics, this results in welding equipment of the highest durability.
![](/sites/default/files/Hintergrund01.png)
![](/sites/default/files/phaser_hintergrund_02.png)
The phaser welded connection is also extremely durable and biocompatible, as only the same type of lead material is used. By avoiding problematic solders, material mixes and the associated potential differences and crevice corrosion, as well as the resulting health hazards for the patient, are avoided from the outset.
Especially Palladium-Silver alloys and Cobalt-Chrome alloys with relatively high carbon content are said to be difficult to weld. Because of the almost eutectic behavior of these alloy types, micro cracks in the welding spot tend to appear easily.
The angle at which the tungsten electrode touches the weld has a significant influence on the penentration depth. Maximum penetration is achieved when the electrode is placed at a 90° angle to the workpiece.
Only the latest high-performance electronics are used in the manufacture of primotec phaser micro-pulse welders. Combined with precise and reliable precision mechanics, this results in welding equipment of the highest durability.
![](/sites/default/files/Hintergrund01.png)
![](/sites/default/files/phaser_hintergrund_02.png)
The phaser welded connection is also extremely durable and biocompatible, as only the same type of lead material is used. By avoiding problematic solders, material mixes and the associated potential differences and crevice corrosion, as well as the resulting health hazards for the patient, are avoided from the outset.
bestseller
all products
all phaser products
primotec phaser mx3
![phaser mx3](/sites/default/files/styles/quer_400x300/public/MediaBilder/primotec_phaser_mx3-042_hauptmenu_1.jpg?itok=Dqw274bu)
Control unit with 230 volt mains cable
1 integrated operating panel with turn, push and tilt button
1 handpiece with integrated gas flow
1 box special tungsten electrodes (10 pieces)
1 pc. diamond disc
1 pc. brass brush
1 pc. connecting cable with "crocodile" clamp, black, length 100cm
1 pin welding adapter set
stereo 10x microscope
1 fully automatic LCD-Shutter
1 handpiece holding arm with high power LED lighting unit
1 replacement glass for für shutter
1 cover hood for microscope
Gas connection set
![mx0-0900](/sites/default/files/styles/quer_400x300/public/MediaBilder/gas-anschluss_mx0-0900_neu.jpg?itok=auO5ACP5)
Connection: W21.8 x 1/14" for DE, AT, BE, CH, HU, KR, CZ,...
200 bar pressure reducer for argon 4.6 with pressure display and flow rate meter (l/m), hose quick connector, further gas connection sets for other countries on request
--> absolutely necessary accessories
Footswitch
![Fußschalter fs0-0600](/sites/default/files/styles/quer_400x300/public/2022-04/fussschalter.jpg?itok=fsxQYNio)
cable length: 185cm
Special tungsten electrodes
![mx0-0100_neu_1](/sites/default/files/styles/quer_400x300/public/MediaBilder/wolframelektroden-primotec-webshop.jpg?itok=JEnzSO4U)
10 pieces (Ø 0,6mm)
Special tungsten electrodes for orthodontics
![Wolfram-elektrode-10-stueck-mx0-0105](/sites/default/files/styles/quer_400x300/public/2022-05/Wolfram-elektrode-10-stueck-mx0-0105.jpg?itok=BQqQZUqY)
10 pieces (Ø 0,5mm)
J O K E R - welding assistant
![Joker-Schweißassistent mx0-0330](/sites/default/files/styles/quer_400x300/public/2022-04/Joker-Schwei%C3%9Fassistent_mx0-0330.jpg?itok=5yBfzCso)
Joker welding assistant Precision tool for distortion-free welding
Included:
- two cast Co-Cr tips
- 12 plastic tips
- Phaser connection cable with plug
- User manual and DVD
Connection cable
![Verbindungskabel 100cm mx0-0240](/sites/default/files/styles/quer_400x300/public/2022-04/Verbindungskabel-100cm_mx0-0240.jpg?itok=MvSbpRw7)
for Joker or Quinto, cable length: 100cm
Diamond-Drive (mx1/mx2)
![mx0-0152](/sites/default/files/styles/quer_400x300/public/MediaBilder/primotec_phaser_mx3-238.jpg?itok=9LEfcTx8)
Diamond disc grinding motor including diamond disc for sharpening the tungsten electrodes for mx1 and mx2 (115V/230V)
Diamond-Drive (mx3)
![mx0-0152](/sites/default/files/styles/quer_400x300/public/MediaBilder/primotec_phaser_mx3-238.jpg?itok=9LEfcTx8)
Diamond disc grinding motor including diamond disc for sharpening the tungsten electrodes for mx3 (115V/230V)
Welding pins 1,3mm for pin welding set
![10 Stück Schweißstifte 1,3mm mx0-0247](/sites/default/files/styles/quer_400x300/public/2022-04/10-St%C3%BCck-Schwei%C3%9Fstifte-1-3mm_mx0-0247.jpg?itok=IDQqX6-5)
10 pieces (Ø 1,3mm) / pack
Pin welding set
![Stiftschweißset mx0-0244](/sites/default/files/styles/quer_400x300/public/2022-04/Stiftschwei%C3%9Fset_mx0-0244.jpg?itok=xAs2koek)
includes pin welding adapter and 10 welding pins
Flexcontactband with cable
![Flexcontact mit 100cm Kabel mx0-0210](/sites/default/files/styles/quer_400x300/public/2022-04/Flexcontact-mit-100cm-Kabel_mx0-0210.jpg?itok=mowRvj44)
Cable length: 100cm
Hand rests
![Handauflagen (2 Stück) mx0-0550](/sites/default/files/styles/quer_400x300/public/2022-04/Handauflagen-2-St%C3%BCck_mx0-0550.jpg?itok=5egUh0q-)
for more comfortable and relaxed working, 2 pieces / pack
Brass brush
![Messingbürsten mx0-0160](/sites/default/files/styles/quer_400x300/public/2022-04/Messingb%C3%BCrsten_mx0-0160.png?itok=2kfSVuhM)
for cleaning the welding area
Diamond grinding disc
![Diamant-Schleifscheibe mx_mx0-0150](/sites/default/files/styles/quer_400x300/public/2022-04/Diamant-Schleifscheibe-mx_mx0-0150.png?itok=x7oVXyQu)
with mandrel, Ø 19 mm, for sharpening the tungsten electrodes with a laboratory handpiece
Diamond disc for Diamond-Drive grinding motor
![Diamant Schleifscheibe mx0-0155](/sites/default/files/styles/quer_400x300/public/2022-04/mx0-0155-diamant-schleifscheibe.png?itok=YHK3zDOy)
replacement diamond grinding disc with flange, Ø 19 mm
Connection clamp with black cable
![Anschlussklemme mit schwarzem Kabel (+) mx0-0200](/sites/default/files/styles/quer_400x300/public/2022-04/Anschlussklemme-mit-100cm-Kabel-sw_mx0-0200.png?itok=pihIMHPk)
with "crocodile" clip, cable length: 100 cm
Connection clamp with red cable
![Anschlussklemme mit rotem Kabel (-) mx0-0205](/sites/default/files/styles/quer_400x300/public/2022-04/Anschlussklemme-mit-100cm-Kabel-Rot_mx0-0205.png?itok=Opt32If4)
with "crocodile" clip, cable length: 100 cm
Solder cross tweezers with connection cable
![mx0-0250 - Lötkreuzpinzette mit 70cm Anschlusskabel](/sites/default/files/styles/quer_400x300/public/2022-05/mx0-0250.jpg?itok=rIXmdw3J)
cable length: 70cm
Flat pointed pliers with connection cable
![mx0-0300 - Flachspitzzange mit 70cm Anschlusskabel](/sites/default/files/styles/quer_400x300/public/2022-05/mx0-0300.jpg?itok=qqvQaJYT)
cable length: 70cm
Ceramic nozzle for the phaser handpiece
![Keramik Feinschweißdüse zum Stecken mx0-0512](/sites/default/files/styles/quer_400x300/public/2022-04/Keramik-Feinschwei%C3%9Fd%C3%BCse-zum-Stecken_mx0-0512.jpg?itok=f40gjgCR)
with ceramic insert
Collet chuck for the phaser handpiece
![Handstück Spannzange mx0-0520](/sites/default/files/styles/quer_400x300/public/2022-04/Handst%C3%BCck-Spannzange_mx0-0520.png?itok=Wbu5N36d)
Tightening nut for the phaser handpiece
![Handstück Spannmutter mx0-0530](/sites/default/files/styles/quer_400x300/public/2022-04/Handst%C3%BCck-Spannmutter_mx0-0530.png?itok=XqALPwkG)
phaser bestseller
primotec phaser mx3
![phaser mx3](/sites/default/files/styles/quer_400x300/public/MediaBilder/primotec_phaser_mx3-042_hauptmenu_1.jpg?itok=Dqw274bu)
Control unit with 230 volt mains cable
1 integrated operating panel with turn, push and tilt button
1 handpiece with integrated gas flow
1 box special tungsten electrodes (10 pieces)
1 pc. diamond disc
1 pc. brass brush
1 pc. connecting cable with "crocodile" clamp, black, length 100cm
1 pin welding adapter set
stereo 10x microscope
1 fully automatic LCD-Shutter
1 handpiece holding arm with high power LED lighting unit
1 replacement glass for für shutter
1 cover hood for microscope
Gas connection set
![mx0-0900](/sites/default/files/styles/quer_400x300/public/MediaBilder/gas-anschluss_mx0-0900_neu.jpg?itok=auO5ACP5)
Connection: W21.8 x 1/14" for DE, AT, BE, CH, HU, KR, CZ,...
200 bar pressure reducer for argon 4.6 with pressure display and flow rate meter (l/m), hose quick connector, further gas connection sets for other countries on request
--> absolutely necessary accessories
Special tungsten electrodes
![mx0-0100_neu_1](/sites/default/files/styles/quer_400x300/public/MediaBilder/wolframelektroden-primotec-webshop.jpg?itok=JEnzSO4U)
10 pieces (Ø 0,6mm)
Diamond-Drive (mx3)
![mx0-0152](/sites/default/files/styles/quer_400x300/public/MediaBilder/primotec_phaser_mx3-238.jpg?itok=9LEfcTx8)
Diamond disc grinding motor including diamond disc for sharpening the tungsten electrodes for mx3 (115V/230V)
all phaser products
primotec phaser mx3
![phaser mx3](/sites/default/files/styles/quer_400x300/public/MediaBilder/primotec_phaser_mx3-042_hauptmenu_1.jpg?itok=Dqw274bu)
Control unit with 230 volt mains cable
1 integrated operating panel with turn, push and tilt button
1 handpiece with integrated gas flow
1 box special tungsten electrodes (10 pieces)
1 pc. diamond disc
1 pc. brass brush
1 pc. connecting cable with "crocodile" clamp, black, length 100cm
1 pin welding adapter set
stereo 10x microscope
1 fully automatic LCD-Shutter
1 handpiece holding arm with high power LED lighting unit
1 replacement glass for für shutter
1 cover hood for microscope
Gas connection set
![mx0-0900](/sites/default/files/styles/quer_400x300/public/MediaBilder/gas-anschluss_mx0-0900_neu.jpg?itok=auO5ACP5)
Connection: W21.8 x 1/14" for DE, AT, BE, CH, HU, KR, CZ,...
200 bar pressure reducer for argon 4.6 with pressure display and flow rate meter (l/m), hose quick connector, further gas connection sets for other countries on request
--> absolutely necessary accessories
Footswitch
![Fußschalter fs0-0600](/sites/default/files/styles/quer_400x300/public/2022-04/fussschalter.jpg?itok=fsxQYNio)
cable length: 185cm
Special tungsten electrodes
![mx0-0100_neu_1](/sites/default/files/styles/quer_400x300/public/MediaBilder/wolframelektroden-primotec-webshop.jpg?itok=JEnzSO4U)
10 pieces (Ø 0,6mm)
Special tungsten electrodes for orthodontics
![Wolfram-elektrode-10-stueck-mx0-0105](/sites/default/files/styles/quer_400x300/public/2022-05/Wolfram-elektrode-10-stueck-mx0-0105.jpg?itok=BQqQZUqY)
10 pieces (Ø 0,5mm)
J O K E R - welding assistant
![Joker-Schweißassistent mx0-0330](/sites/default/files/styles/quer_400x300/public/2022-04/Joker-Schwei%C3%9Fassistent_mx0-0330.jpg?itok=5yBfzCso)
Joker welding assistant Precision tool for distortion-free welding
Included:
- two cast Co-Cr tips
- 12 plastic tips
- Phaser connection cable with plug
- User manual and DVD
Connection cable
![Verbindungskabel 100cm mx0-0240](/sites/default/files/styles/quer_400x300/public/2022-04/Verbindungskabel-100cm_mx0-0240.jpg?itok=MvSbpRw7)
for Joker or Quinto, cable length: 100cm
Diamond-Drive (mx1/mx2)
![mx0-0152](/sites/default/files/styles/quer_400x300/public/MediaBilder/primotec_phaser_mx3-238.jpg?itok=9LEfcTx8)
Diamond disc grinding motor including diamond disc for sharpening the tungsten electrodes for mx1 and mx2 (115V/230V)
Diamond-Drive (mx3)
![mx0-0152](/sites/default/files/styles/quer_400x300/public/MediaBilder/primotec_phaser_mx3-238.jpg?itok=9LEfcTx8)
Diamond disc grinding motor including diamond disc for sharpening the tungsten electrodes for mx3 (115V/230V)
Welding pins 1,3mm for pin welding set
![10 Stück Schweißstifte 1,3mm mx0-0247](/sites/default/files/styles/quer_400x300/public/2022-04/10-St%C3%BCck-Schwei%C3%9Fstifte-1-3mm_mx0-0247.jpg?itok=IDQqX6-5)
10 pieces (Ø 1,3mm) / pack
Pin welding set
![Stiftschweißset mx0-0244](/sites/default/files/styles/quer_400x300/public/2022-04/Stiftschwei%C3%9Fset_mx0-0244.jpg?itok=xAs2koek)
includes pin welding adapter and 10 welding pins
Flexcontactband with cable
![Flexcontact mit 100cm Kabel mx0-0210](/sites/default/files/styles/quer_400x300/public/2022-04/Flexcontact-mit-100cm-Kabel_mx0-0210.jpg?itok=mowRvj44)
Cable length: 100cm
Hand rests
![Handauflagen (2 Stück) mx0-0550](/sites/default/files/styles/quer_400x300/public/2022-04/Handauflagen-2-St%C3%BCck_mx0-0550.jpg?itok=5egUh0q-)
for more comfortable and relaxed working, 2 pieces / pack
Brass brush
![Messingbürsten mx0-0160](/sites/default/files/styles/quer_400x300/public/2022-04/Messingb%C3%BCrsten_mx0-0160.png?itok=2kfSVuhM)
for cleaning the welding area
Diamond grinding disc
![Diamant-Schleifscheibe mx_mx0-0150](/sites/default/files/styles/quer_400x300/public/2022-04/Diamant-Schleifscheibe-mx_mx0-0150.png?itok=x7oVXyQu)
with mandrel, Ø 19 mm, for sharpening the tungsten electrodes with a laboratory handpiece
Diamond disc for Diamond-Drive grinding motor
![Diamant Schleifscheibe mx0-0155](/sites/default/files/styles/quer_400x300/public/2022-04/mx0-0155-diamant-schleifscheibe.png?itok=YHK3zDOy)
replacement diamond grinding disc with flange, Ø 19 mm
Connection clamp with black cable
![Anschlussklemme mit schwarzem Kabel (+) mx0-0200](/sites/default/files/styles/quer_400x300/public/2022-04/Anschlussklemme-mit-100cm-Kabel-sw_mx0-0200.png?itok=pihIMHPk)
with "crocodile" clip, cable length: 100 cm
Connection clamp with red cable
![Anschlussklemme mit rotem Kabel (-) mx0-0205](/sites/default/files/styles/quer_400x300/public/2022-04/Anschlussklemme-mit-100cm-Kabel-Rot_mx0-0205.png?itok=Opt32If4)
with "crocodile" clip, cable length: 100 cm
Solder cross tweezers with connection cable
![mx0-0250 - Lötkreuzpinzette mit 70cm Anschlusskabel](/sites/default/files/styles/quer_400x300/public/2022-05/mx0-0250.jpg?itok=rIXmdw3J)
cable length: 70cm
Flat pointed pliers with connection cable
![mx0-0300 - Flachspitzzange mit 70cm Anschlusskabel](/sites/default/files/styles/quer_400x300/public/2022-05/mx0-0300.jpg?itok=qqvQaJYT)
cable length: 70cm
Ceramic nozzle for the phaser handpiece
![Keramik Feinschweißdüse zum Stecken mx0-0512](/sites/default/files/styles/quer_400x300/public/2022-04/Keramik-Feinschwei%C3%9Fd%C3%BCse-zum-Stecken_mx0-0512.jpg?itok=f40gjgCR)
with ceramic insert
Collet chuck for the phaser handpiece
![Handstück Spannzange mx0-0520](/sites/default/files/styles/quer_400x300/public/2022-04/Handst%C3%BCck-Spannzange_mx0-0520.png?itok=Wbu5N36d)
Tightening nut for the phaser handpiece
![Handstück Spannmutter mx0-0530](/sites/default/files/styles/quer_400x300/public/2022-04/Handst%C3%BCck-Spannmutter_mx0-0530.png?itok=XqALPwkG)
![primotec_phaser_mx3-231_schmal.jpg](/sites/default/files/MediaBilder/primotec_phaser_mx3-231_schmal_0.jpg)
downloads
publications
FAQ´s
Which alloys and metals can I use for welding?
- All precious metal alloys containing gold, silver, platinum and palladium.
- Cobalt-chrome alloys, nickel-chrome and titanium.
- with certain limitations (depending on the alloys), aluminum, stainless steel, tin and most brass alloys.
Do all alloys behave the same during welding?
- No – the welding result depends on the melting range and the thermal conductivity of the alloy. For example, the lower an alloy's thermal conductivity, the less energy (power X impulse time) is required to melt it.
Can I weld right next to acrylic and ceramic?
- Yes – the heat-affected zone during welding with the primotec phaser is comparable to the heat that develops during laser welding.
Can I also weld without inert gas?
- Yes - but welding without shielding gas causes heavy oxidation and soot formation at the welding point.
Without inert gas the spot welds will become porous and loose their stability.
Can I use a different inert gas besides Argon grade 5?
- In principle, yes. However, we recommend Argon grade 5, because we have obtained the best results with it.
How much gas is consumed during welding?
- Each spot weld consumes about 0.1 to 0.2 liters of gas. A 10-liter bottle contains 2,000 liters of gas. That means more than 10,000 welds per filling.
Can I use welding wire?
- Yes – we recommend welding wire made of the same kind of material with a thickness of 0.35mm to 0.50mm.
Can I add solder?
- No – Solder tends to "scorch" because of its low-melting components. That is the reason why you should never weld on solder points.
How deep do spot welds penetrate into the material?
- The penetration depth depends on the energy settings for welding (power X impulse time), the thermal conductivity of the material to be welded and the angle at which the electrode tip is held.
That means that the higher the welding energy and the lower the thermal conductivity, the deeper the penetration of the spot weld will be.
Can I weld different alloys together?
- Yes – You can even weld together alloys that have very different properties, such as gold with cobalt-chrome alloys.
Titanium can only be welded to Titanium
Can the spot welds take up tungsten particles from the electrode tip?
- If the phaser is not operated properly, it cannot be entirely ruled out that tungsten particles may end up in the spot weld. However, this is highly unlikely when the phaser is operated properly.
How thin can the material to be welded be?
- Depending on the material, it should have a minimum layer thickness of 0.1 to 0.2mm.
What kind of operating and maintenance costs can I reckon with?
- The welder is maintenance free.
- Under normal operating conditions, you only have to pay the low costs for Argon gas and for wear-and-tear of the electrodes.
How many spot welds are possible with one electrode?
- Since the tips of tungsten electrodes have to be sharpened, they get shorter over time. Electrode lifetime is about 1,000 spot welds.
Which alloys and metals can I use for welding?
- All precious metal alloys containing gold, silver, platinum and palladium.
- Cobalt-chrome alloys, nickel-chrome and titanium.
- with certain limitations (depending on the alloys), aluminum, stainless steel, tin and most brass alloys.
Do all alloys behave the same during welding?
- No – the welding result depends on the melting range and the thermal conductivity of the alloy. For example, the lower an alloy's thermal conductivity, the less energy (power X impulse time) is required to melt it.
Can I weld right next to acrylic and ceramic?
- Yes – the heat-affected zone during welding with the primotec phaser is comparable to the heat that develops during laser welding.
Can I also weld without inert gas?
- Yes - but welding without shielding gas causes heavy oxidation and soot formation at the welding point.
Without inert gas the spot welds will become porous and loose their stability.
Can I use a different inert gas besides Argon grade 5?
- In principle, yes. However, we recommend Argon grade 5, because we have obtained the best results with it.
How much gas is consumed during welding?
- Each spot weld consumes about 0.1 to 0.2 liters of gas. A 10-liter bottle contains 2,000 liters of gas. That means more than 10,000 welds per filling.
Can I use welding wire?
- Yes – we recommend welding wire made of the same kind of material with a thickness of 0.35mm to 0.50mm.
Can I add solder?
- No – Solder tends to "scorch" because of its low-melting components. That is the reason why you should never weld on solder points.
How deep do spot welds penetrate into the material?
- The penetration depth depends on the energy settings for welding (power X impulse time), the thermal conductivity of the material to be welded and the angle at which the electrode tip is held.
That means that the higher the welding energy and the lower the thermal conductivity, the deeper the penetration of the spot weld will be.
Can I weld different alloys together?
- Yes – You can even weld together alloys that have very different properties, such as gold with cobalt-chrome alloys.
Titanium can only be welded to Titanium
Can the spot welds take up tungsten particles from the electrode tip?
- If the phaser is not operated properly, it cannot be entirely ruled out that tungsten particles may end up in the spot weld. However, this is highly unlikely when the phaser is operated properly.
How thin can the material to be welded be?
- Depending on the material, it should have a minimum layer thickness of 0.1 to 0.2mm.
What kind of operating and maintenance costs can I reckon with?
- The welder is maintenance free.
- Under normal operating conditions, you only have to pay the low costs for Argon gas and for wear-and-tear of the electrodes.
How many spot welds are possible with one electrode?
- Since the tips of tungsten electrodes have to be sharpened, they get shorter over time. Electrode lifetime is about 1,000 spot welds.